HP LaserJet Pro 400 MFP M425 - Enable or disable the At Very Low settings

Enable or disable the At Very Low settings

You can enable or disable the default settings at any time, and you do not have to re-enable them when you

install a new toner cartridge.

1.

From the Home screen on the product control panel, touch the Setup button.

2.

Open the following menus:

●

System Setup

●

Supply Settings

●

Black Cartridge

●

Very Low Setting

3.

Select one of the following options:

●

Select the

Continue

option to set the product to alert you that the toner cartridge is very low, but

to continue printing.

●

Select the

Stop

option to set the product to stop printing (including printing faxes) until you

replace the toner cartridge.

●

Select the

Prompt

option to set the product to stop printing (including printing faxes) and prompt

you to replace the toner cartridge. You can acknowledge the prompt and continue printing. A

customer configurable option on this product is "Prompt to Remind Me in 100 pages, 200 pages,

300 pages, 400 pages, or never." This option is provided as a customer convenience and is not an

indication these pages will have acceptable print quality.

When the product is set to the

Stop

option, there is some risk that faxes will not print after the new cartridge

is installed if your product has received more faxes than the memory can hold while stopped.

When the product is set to the

Prompt

option, there is some risk that faxes will not print after the new

cartridge is installed if your product has received more faxes than the memory can hold while the product is

waiting for the prompt to be acknowledged.

Once an HP toner cartridge has reached Very Low, HP’s Premium Protection Warranty on that toner cartridge

has ended. All print defects or cartridge failures incurred when an HP toner cartridge is used in

Continue

at

ENWW

Print when a toner cartridge is at estimated end of life 137